accessories
Anode Retaining Bolt
$11.50
Retaining bolts will come with your propeller but should you lose one in action, we're here for you. Just record your prop type in the...
View full product details
Aperture A Anode
$55.00
Outside Diameter - 2 3/4" / 70mm Fastener - 3 Off M6 x 16 SHCS
View full product details
Aperture B Anode
$97.00
Measurement point to flat - 3 3/4" / 95mm Fastener - 3 Off x 40 SHCS
View full product details
Brace Donuts
$65.00
Brace Donuts – packs – 10 x 30mm, 6 x 40mm, 0 x 50mm Machined from Delrin (crystalline plastic) Can be supplied drilled or blank...
View full product details
ES Anode
$115.00
Outside Diameter - 4 1/2" / 115mm Fastener - M10 x 80 SHCS
View full product details
Grease (450g cartridge)
$18.00
Fuchs grease is one of the finest on the market, perfect when you need to revitalise your old prop. Always keep one on hand just...
View full product details
Grease Nipple
$4.80
Grease nipples will be provided with your new prop but if you need a replacement you can order more through us here. PLEASE NOTE...
View full product details
Junior Three Blade Anode
$69.00
Outside Diameter - 2" / 52mm Fastener - 3/8" x 1 1/2", UNC SHCS
View full product details
LD Anode
$155.00
Outside Diameter - 6" / 150mm Fastener 1 - 1 Off M12 x 80 SHCS Fastener 2 - 3 Off M8 x 40 SHCS ...
View full product details
New Junior Three Blade Anode
$64.00
Outside Diameter - 2 3/4" / 70mm Fastener - M8 x 40 SHCS
View full product details
Pole End Fittings
$119.00
Pole end fittings to suit 34.5mm ID tube Machined from 316 Stainless Steel – pictured here and generally in stock Can be made in Titanium...
View full product details
Seat Cushion Catches
$76.00
An original JBC design used to secure cushions over choppy seas! One piece is attached to the boat – a small smooth piece which looks...
View full product details
Senior Three Blade Anode
$70.00
Outside Diameter - 3 1/2" / 90mm Fastener - M8 x 70 SHCS
View full product details
Solid 800mm Mirror Polished Staunchion
$440.00
25” diameter 110mm base diameter with 4 countersunk 6.5mm holes on 90mm PCD Life lines on 266 centres Life line holes – 11mm Other sizes...
View full product details
Thimbles
$50.00
Machined from sturdy SAF2205 Suitable for 10mm rope ID – 17mm Can be purchased or individually or in packs of ten Can be shipped within...
View full product details
Weld In Halogen Light Fitting
$116.00
Halogen light fitting provided in lamp holder Ready to be welded in to plates and tubes Comes in two convenient sizes: Small uses a standard...
View full product detailsFollow
© 2024 JBC Engineering.
Powered by Shopify
